Casio Exilim EX-Z300 User Manual page 90

1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use [4] and [6] to scroll through the movie and
search for the frame (point) from which or to
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing
back the movie and pressing [SET] to pause. During
playback, you can press [4] or [6] to perform fast
reverse or fast forward.
3.
When the frame where you want the cut point to
be is displayed, press [2].
Cut
}
(To-Point Cut)
Cut
~
(Point-To-Point Cut)
Cut
¡
(From-Point Cut)
4.
Use [8] and [2] to select "Yes" and then press [SET].
The selected cut operation will take considerable time to complete. Don't try to
perform any camera operation until the "Busy... Please wait..." message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
While the frame you want the cut to be up to is
displayed, press [2].
While the frame you want the first (From) cut to be is
1
displayed, press [2].
While the frame you want the second (To) cut to be
2
is displayed, press [2].
While the frame you want the cut to be from is
displayed, press [2].
90
Cut range (red)
Other Playback Functions (PLAY)