Specifying The Auto Focus Area - Casio EX-Z30/EX-Z40 User Manual

OTHER RECORDING FUNCTIONS
To do this:
Turn on Auto Pan Focus
Turn off Auto Pan Focus
I Specifying the Auto Focus Area
You can use the following procedure to change the Auto
Focus area used in the Auto Focus Mode and the Macro
Mode. Note that the configuration of the focus frame
changes in accordance with the Auto Focus area you
select.
1.
In the REC mode, press [MENU].
2.
On the "REC" tab, select "AF Area", and then
press [ ].
3.
Select the Auto Focus area you want, and
then press [SET].
Select this setting:
On
Off
63
For this type of Auto Focus area:
Very limited range in the center of the
screen
• This setting works well with focus lock
(page 66).
Automatic selection of the focus area where
the subject closest to the camera is located
• With this setting, a wide focus frame,
which contains seven focus points,
appears on the monitor screen first. When
you press the shutter release button half
way, the camera automatically selects the
focus point where the subject closest to
the camera is located, and a focus frame
appears at that point.
• This setting works well for group photos.
• Spot
Focus frame
Select this:
Spot
Multi
• Multi
Focus frame