Table of Contents
Advertisement
Safety Precautions
oStop using this product if any of the
abnormalities below is detected
Otherwise, it may cause fire or electric shock.
● When smoke, unusual odor, or other abnormal
symptoms are found.
● When the unit is not functioning properly, such as
when there is no image on the display or no sound.
● When water or other foreign object gets into the unit.
● When the cabinet is damaged from dropping.
● When the power cable is damaged. (Exposure or
breaking of the cable core, etc.)
If any of the above occurs, turn off the power
immediately, and unplug the power cable from the
outlet.
If smoke is detected, confirm that smoke has stopped
emitting before sending the product to the dealer for
repair.
You must not attempt to repair the product on your own.
Doing so may be dangerous.
oDo not block the ventilation holes
Blocking the ventilation holes may cause heat to trap
inside the unit and result in fire.
oDo not dismantle or modify the product
The product may malfunction or break down.
oDo not damage the power cable
Damaging the power cable may cause fire or electric
shock.
● Do not alter the power cable.
● Do not bend, twist, or pull the cable by force.
● Do not place equipment or other heavy objects on
the power cable.
● Do not place the power cable near a heating
equipment.
oDo not place the product on an unstable surface.
Do not place the product on an unstable platform or
inclined surface. The unit may fall off, causing it to
malfunction or break down.
oDo not place heavy objects on the product
If heavy objects or those with a bigger size than the unit
are placed on it, the product may lose its balance and
fall off, thus causing injuries.
oUnplug the power cable if the product is not to
be used for a long time
For reasons of safety and energy conservation, unplug
the power cable if you are not using it again soon.
oDo not pull the cord when unplugging the power
cable
Pulling the power cable at the cord may damage it,
causing fire or electric shock. To unplug, pull out by
holding the plug.
oDo not unplug power cable with wet hands
Doing so may cause electric shock.
oUnplug the power cable and disconnect all
cables before moving the unit
Moving the unit with the cables connected may
damage the cables, causing fire or electric shock.
Precautions for Proper Use
Locations of Storage and Use
oDo not place this product at the following
locations.
Doing so may cause the product to malfunction or
break down.
● Hot or cold places beyond the allowable operating
temperature range (10 °C to 35 °C)
● Places that emit a strong magnetic field, such as
near transformers and motors
● Places near devices that emit radio waves, such as
transceivers and mobile phones
● Places with considerable dust and sand
● Places subject to strong vibrations
● Places where water droplets may be formed, such as
window sides
● Places that emit radiation, X-rays, and corrosive
gases
Handling Precautions
oDo not stack the devices on one another during
use.
Heat and noise from the other units may cause the
product to malfunction or break down, and result in fire.
oDo not block the ventilation holes
Doing so may cause heat to trap inside the unit and
result in fire. Do not use this product by laying it down
sideways, upside down, or at an angle.
oDo not insert objects into this unit.
Metallic or other flammable objects that get into this
unit, such as through the ventilation holes, may result
in fire or electric shock.
Maintenance
oTo clean this product, wipe it with a soft rag.
Wiping using thinner or benzene may cause the surface
to melt or fog. When the surface is extremely dirty, wipe
using a cloth that is dipped into a neutral detergent
diluted with water, followed by wiping with a dry cloth.
Energy Conservation
oFor reasons of safety and energy conservation,
unplug the power cable if you are not using the
product again soon.
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of JVC KENWOOD
Corporation is:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11
61118 Bad Vilbel
Germany
Advertisement
Table of Contents
