JVC PK-EM1 - 3D Synchro Emitter Instructions

Name of Parts

Thank you for purchasing this product.
Please read through the "INSTRUCTIONS" carefu ly in advance to ensure that it is used correctly. After reading, keep this manual in a place that can be easily retrieved whenever necessary.

1. 3D SYNCHRO EMITTER
   1. 3D SYNCHRO EMITTER cable (3 m)
      Connect it to the [3D Synchro] terminal of the projector.
2. Stand (supplied)
   Use this when there is a need to adjust the angle for transmitting signals from the 3D SYNCHRO EMITTER to the 3D GLASSES.
   1. Platform
   2. Fixing screw hole for stand (x 4)
   3. Fixing screw for sync emitter unit

Installation

• Install this product in the direction in which the 3D GLASSES are to be used so that infrared signals can reach the glasses directly.
• Install this product at a location where there are no obstructing objects in between it and the 3D
• GLASSES.
• By inclining the platform at an angle when installing this product on the stand, you can identify the bottom screws of the 3D SYNCHRO EMITTER easily, thus helping you to install the emitter more smoothly. In addition, you can also insert your fingers easily, making it easier to turn the set screws.
  
• When installing this product to a wall or ceiling, make use of screws that suit the material and strength of the wall or ceiling. Otherwise, it may cause damage to the material of the wall or ceiling.
• When using a screw, open a hole in the sponge at the bottom of the stand in advance.
• Request the authorized dealer or installation service provider to install this product securely with safety taken into thorough consideration.
• JVC will not be liable for any accident or damage due to causes such as improper installation, insufficient mounting strength, misuse, or natural disasters.

Connection

1. Turn off the power of the projector
2. Connect the 3D SYNCHRO EMITTER cable to the [3D Synchro] terminal of the projector
   Note:
   • For details on how to view 3D images, refer to the "Instruction Manual" of the projector.|
     
   • Do not connect any device to this product other than a JVC 3D projector.

Main Specifications

Accessories

• Stand

Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany

Safety Precautions

• Make sure that the bolts and screws are securely fastened. Otherwise, the unit may fall off, resulting in injuries or accidents.
• Do not drop or dismantle/modify the product. Doing so may result in damage or malfunction.
• Make sure that you put on the 3D GLASSES when viewing 3D images. Do not view 3D images with naked eyes. Otherwise, you may experience discomfort.
• For those who have a pre-existing photosensitivity disorder or heart disease, or are feeling unwell, do not use the 3D GLASSES.
• When viewing 3D images, you may sometimes experience discomfort, such as eye fatigue or nausea. If you sense any change in your physical condition, stop viewing immediately and consult a doctor if necessary.
• A guardian must be present when children (particularly those below six years old) are using the 3D GLASSES. Children may fall sick suddenly as they may have difficulty detecting any fatigue or discomfort. Pay attention to any change in the physical condition of the children when using the 3D GLASSES.

Precautions During Use

• Place of storage and use
  • When using the 3D GLASSES under a fluorescent light in a room, the light of the room may appear to flicker. In this case, darken the fluorescent light or turn it off.
• Others
  • Use this product with JVC's 3D projectors or 3D GLASSES (PK-AG1).
    • Please visit the JVC home page for information on the 3D compatible devices.
  • 3D images may appear different across individuals.
  • When viewing 3D images, it is recommended that you take breaks at regular intervals.
  • The 3D GLASSES operates using infrared signals received from the 3D SYNCHRO EMITTER. It may not function properly in the following cases.
    • When it is used near devices such as an infrared communication or lighting equipment.
    • When the 3D GLASSES are not facing the 3D SYNCHRO EMITTER.
  • Do not install the 3D SYNCHRO EMITTER with it facing the projector directly. Doing so may prevent the remote control of the projector from functioning properly.
  • This product may affect other infrared communication equipments.

FCC INFORMATION (U.S.A. only)

Changes or modification not approved by JVC could void the user's authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician or help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download JVC PK-EM1 - 3D Synchro Emitter Instructions