Inserting The Unit In The Shelf; Removing The Unit From The Shelf - GE T1 Multiplexer Installation Manual

Inserting the Unit in the Shelf

The (B)86431-0X unit should be inserted with the front-panel fuse
removed. The B86431-4X unit is installed with fuse in place.
Do not use the extractor to force the unit into the shelf as this could
1. (Applicable to (B)86431-0X units only!) Ensure that the front-panel fuse is
removed.
2. Insert the unit to the point of resistance.
3. Gently seat the unit into the shelf by pressing the front panel. Ensure the
extractor is not preventing the unit from insertion.
4. (Applicable to (B)86431-0X units only!) Install the fuse through the opening
on the front panel.

Removing the Unit from the Shelf

1. Pull the extractor to remove the unit from the shelf.
Copyright  GE Multilin Inc. 2001-2013
NOTE
WARNING
result in damage to the extractor.
342-86400-431PS
Issue 2.1
March 2013
Page 16