Download Print this page

NavePoint 00300598-25U Quick Start Manual

Advertisement

Quick Links

4-Post Open Frame Adjustable Rack
Thank you for purchasing a NavePoint product. NavePoint intends this manual to guide you through
a smooth installation of the product. NavePoint assumes that you are qualified in the servicing of
computer equipment and trained in recognizing any hazards that may occur in the installation of this
product. If you have any questions regarding the installation or use of your product, please call us at
888.505.1363.
Examine the package for any damaged or loose parts. If
anything is damaged or missing, contact NavePoint for
assistance. Do not attempt to install or use product if it
has been damaged.
The information contained in this document is subject to change
without notice.
NavePoint makes no warranty of any kind with regard to this
material, including, but not limited to the implied warranties of
merchantability and fitness for a particular purpose.
NavePoint shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
NavePoint assumes no responsibility for the use, application, or
reliability of the software or hardware that you install into the
product. Always install the heaviest equipment in the bottom.
It is highly recommended that installation of this product be
performed by a qualified and experienced installer. Improper
installation of this product could result in damage to the
product, other equipment, or personal injury. NavePoint cannot
be held responsible for damage to equipment or personal
injury resulting from improper use, installation or the misuse of
information presented in this document.
Assembly Hardware
J
M8 Bolt x36
K
M* (13mm) Wrench x1
Part
Quantity
A
Left Vertical Rail x 2
B
Right Vertical Rail x 2
C
Base Bracket x 2
D
Bottom Corner Bracket x 4
E
Bottom Center Bracket x 2
F
Top Left Corner Bracket x 2
G
Top Right Corner Bracket x2
H
Top Center Bracket x2
I
Top Support Bracket x2
Instructions for Products:
00300598 - 25U
00300599 - 45U
Equipment Mounting
Hardware
25U: 20 sets of M6 Cage Nut, Screw, and Plastic Washer
45U: 40 sets of M6 Cage Nut, Screw, and Plastic Washer.
Cable Management
25U: 16 Cable Management Hooks (L) and
Hook Mounting Screws (M)
45U: 28 Cable Management Hooks (L) and
Hook Mounting Screws (M)
www.NavePoint.com
customerservice@navepoint.com
© 2017 NavePoint, LLC
Rev. 201708
Important information-
Keep this information for further reference.
WARNING
Limitations of Liability: In no event will NavePoint, LLC. (or its officers, direc-
tors, employees or agents) be liable for any damages, whether direct or
indirect, special, punitive, incidental or consequential damages (including,
but not limited to, lost profits or revenue, loss of use, lost business opportu-
nities or loss of goodwill) or for the costs of procuring substitute products,
arising out of or in connection with the use of the product, whether such
liability arises from any claim based upon contract, warranty, tort (including
negligence), product liability or otherwise, whether or not seller has been
advised of the possibility of such loss or damage. In no event will seller's
total cumulative liability, from all causes of action and all theories of liabil-
ity, exceed the total amounts actually paid to seller by customer under the
order that gives rise to any liability hereunder.

Advertisement

loading

Summary of Contents for NavePoint 00300598-25U

  • Page 1 Thank you for purchasing a NavePoint product. NavePoint intends this manual to guide you through a smooth installation of the product. NavePoint assumes that you are qualified in the servicing of computer equipment and trained in recognizing any hazards that may occur in the installation of this product.
  • Page 2 Create the Adjustable Beams (Installer should deter- mine what depth they would like and make sure that each Adjustable Beam is the same depth) a. Top Adjustable Beam: i. Attach Top Left Corner Bracket (F) and Top Right Corner Bracket (G) to Top Center Bracket (H) using 2 M8 Bolts (J) (Repeat step to create second Top Adjustable Beam) –...
  • Page 3 Create and Attach Right Frame to the Left Frame. a. Connect the other Bottom Adjustable Frame and Left Vertical Rail (A) and Right Vertical Rail (B) to the Base Brackets (C) with 4 M8 Bolts b. Connect the other Top Adjustable Frame and Left Vertical Rail (A) and Right Vertical Rail (B) to the Top Support Brackets (I) using 4 M8 Bolts (J).

This manual is also suitable for:

00300599-45u