Keypad Volume; Digit Dial Readout; Service Alerts - Casio G'zOne Rock User Manual

3.
Select Tone/Vibrate/Reminder, then press the Center Select Key
[OK].
Tone: Select a ringer, then press the Center Select Key [SET]. To
play the alert tone, press the Left Soft Key [Play].
Vibrate: Select On or Off, then press the Center Select Key [SET].
Reminder: Select Once/Every 2 Minutes/Every 15 Minutes/Off,
then press the Center Select Key [SET].
NOTES
• Emergency Tone has the following settings: Alert/Vibrate/Off.
• PTT Alert has only two settings: Tone/Vibrate.

Keypad Volume

To set the keypad volume:
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Sounds Settings,
2.
Adjust the volume by pressing the Directional Key
then press the Center Select Key [SET] to save the setting.

Digit Dial Readout

To set whether to read out the numbers being entered when dialing a
phone number:
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Sounds Settings,
2.
Select On or Off, then press the Center Select Key [SET].

Service Alerts

To set any of the three Alert options to either On or Off:
1.
From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
Keypad Volume.
Digit Dial Readout.
up or down,
131