Information - Honeywell LeakFilm MC Technical Manual

LeakFilm MC Technical Manual 3013M5005 Issue 3
MAN0966 04-15

2. Information

This manual is for use with LeakFilm Sensors and Controllers range only.
Honeywell Analytics can take no responsibility for installation and/or use of its equipment if not
done so in accordance with the appropriate issue and/or amendment of the Technical Manual.
The reader of this Operating Manual should ensure that it is appropriate in all details for the exact
equipment to be installed and/or operated. If in doubt, contact Honeywell Analytics for advice.
The following types of notices are used throughout this Operating Manual:
WARNING
Identifies a hazardous or unsafe practice which could result in severe injury or
death to personnel.
Caution: Identifies a hazardous or unsafe practice which could result in minor
injury to personnel, or product or property damage.
Note: Identifies useful/additional information.
Every effort has been made to ensure the accuracy of this document, however,
Honeywell Analytics can assume no responsibility for any errors or omissions in this
document or their consequences.
Honeywell Analytics would greatly appreciate being informed of any errors or omissions that
may be found in the content of this document.
For information not covered in this document, or if there is a requirement to send
comments/corrections about this document, please contact Honeywell Analytics using the
contact details given on the back page.
Honeywell Analytics reserve the right to change or revise the information supplied
in this document without notice and without obligation to notify any person or
organisation of such revision or change. If information is required that does not
appear in this document, contact the local distributor/agent or Honeywell Analytics.
3