Table of Contents
Advertisement
2.4.5.4.
SP Command List
The following tables contain SP command lists by category:
System Control
CMD
Shut down System power
DF
(override)
DN
Shut down System power
DP
System Dump
PC
Power Cycle
RS
Cold Reset System
UB
Bring up BIOS
UP
Bring up System
"m": Commands can be executed only on the master iSP.
command name
function
The iSP turns off the DC power of the
specified partition without notifying the
SW (OS) even if it is running.
If the specified partition is in S0 state,
the iSP only generates the SCI
(POWBTN). Otherwise, the iSP turns
off the DC power directly.
The iSP generates the INIT signal to
the specified partition. SW (OS) will
enter its dump routine.
The iSP turns off the DC power of the
specified partition without notifying the
SW (OS) even if it is running, turns on
the DC power, initializes HW and
hands off the control to the BIOS.
The iSP initializes the specified
partition without notifying the SW (OS)
even if it is running.
The iSP turns on the DC power of the
specified partition and initializes HW
and hands off the control to the BIOS.
The iSP turns on the DC power of the
specified partition and initializes HW
and hands off the control to the BIOS.
The BIOS will boot the Operating
System.
2-29
Base Module
iSP
state
m
m
m
m
m
m
m
855-900549
Advertisement
Table of Contents
