Table of Contents
Advertisement
NX7700i/5020M-16 System Overview
1.1.
Configuration and Specifications of the Base Module
The base module of this system is composed of the following hardware components:
− CELL
Can install one to four Intel Itanium2 processors.
The minimum required memory capacity is 2GB and can be expanded up to 128GB.
− I/O MODULE
Can contain:
Up to 8 PCI cards
A DVD-ROM unit
A DAT unit
Up to 4 HDDs (up to two HDDs when DAT is used)
− POWER BAY
Can contain to 3 DPSs (AC/DC converters).
The iSP of the base module supports the following interfaces as standard equipment:
(1) 10/100Base-TX Ethernet interface for the SP console
(2) Serial (RS-232C) interface for the SP console
Layout of the base module components and system specifications are shown in the subsequent
pages.
855-900549
1-2
Advertisement
Table of Contents
