Design Specifications - Canon EOS 7 Service Manual

Part 1: General Information

4. DESIGN SPECIFICATIONS

1. Type
1-1 Type:
1-2 Picture size:
1-3 Compatible lenses:
1-4 Lens mount:
1-5 Standard lens:
2. AF
2-1 Type:
2-2 Focusing points:
2-3 Focusing modes:
35mm AF/AE single-lens reflex camera with focal-plane
(vertical travel) shutter and built-in motor drive and
flash.
24 mm 36 mm
* No panorama mode.
Canon EF lenses (Max. aperture metering. No stop-down
metering.)
Canon EF mount
Canon EF 28-105mm f/3.5-4.5 II USM
Canon EF 28-90mm f/4-5.6 (USM)
TTL-CT-SIR (Through-the-Lens Cross-Type Secondary
Image Registration) with || — +
(TTL secondary, image-forming phase difference
detection)
7 (Extreme left, left, top, center, bottom, right, extreme
right)
(1) Autofocus
The following three modes are provided:
1) One-Shot AF
AF operation stops (AF lock) when focus is achieved.
* AF-priority: The shutter can be released only when focus is
achieved.
* With evaluative metering, AE lock is applied when focus is
achieved.
* When a USM lens is used, manual focusing with the
electronic focusing ring is enabled after autofocus is achieved
with One-Shot AF or when focus fails to be achieved.
* One-Shot AF set automatically in the Portrait, Landscape,
Closeup, and Night Scene modes.
2) Predictive AF with AI Servo AF
Tracks subject movement continuously up to the start of
exposure.
* For the first frame during single-frame or continuous
shooting: Shutter release-priority (in Creative Zone modes).
For the first frame during single-frame or continuous
shooting: Focus-priority (in Full Auto and Sports modes).
For the second and subsequent frames during continuous
shooting: Focus-priority.
* No in-focus indicator <
* When focus fails, <
* Predictive AF with AI Servo AF set automatically in Sports
mode.
1-12
—
|| CMOS sensor.
> and no in-focus beeper.
> blinks at 2 Hz.