Table of Contents
Advertisement
8.17. Remove the Support metal (C)
1. Remove the screws (×4
2. Remove the Support metal (C).
3. Remove the screws (×2
4. Remove the Shield metals (L, R).
8.18. Remove the Support metals (L,
R)
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the screws (×2
3. Remove the Support metals (L, R).
, ×2
).
).
, ×1
each).
8.19. Remove the Vertical bar-down
assy
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the Support metal (C). (See section 8.17.)
3. Remove the screws (×2
Vertical bar-down assy (L, R).
4. Remove the screws (×4
connecting metal-top (L, R).
5. Remove the screws (×2
metals (L, R).
6. Remove the screws (×2
necting metal-bottom (L, R) and the Bracket covers (L,
R).
25
, ×2
each) and remove the
each) and remove the V-bar
) and remove the V-bar fixing
each) and remove V-bar con-
Advertisement
Table of Contents
