Wireless ID
[1, 2, 3, 4]
Configure the unit's remote control ID. The settings for this item
correspond to the [CAMERA 1] to [CAMERA 4] buttons on the
wireless remote control.
Factory settings: 1
OSD off with Tally
[Off, On]
"Off" or "On" the function that turns off menu and other displays
when red tally signals are received via commands.
When the red tally signal releases, the menu display will return.
Factory settings: Off
Color Bar
[Off, On]
Switch between color bar display and camera image display.
Factory settings: Off
[Note]
Only HDMI and SDI can output color bar.
IP and USB cannot output color bar.
Audio
[Off, On]
Enable/disable the audio input signal from the device connected
to the audio input connector.
Factory settings: Off
Color Bar
60