Network Settings; Use The Easy Ip Setup Software - Panasonic AW-UE20KP Operating Instruction

Network Settings

Use the Easy IP setup Software to Establish the Unit's Settings
The settings related to the unit's network can be established using the Easy IP Setup Software.
You can obtain Easy IP Setup Software (EasyIPSetup.exe) by downloading it from the following website.
https://pro-av.panasonic.net/
To establish the settings for a multiple number of units, the settings must be selected for each camera involved.
If the settings cannot be established using the Easy IP Setup Software, select the settings separately for the unit and
personal computer on the Network setup screen [Network] of the setting menu.
[Note]
 If, after the network settings have been established, another device in the same network has the same IP address,
the network operations will not be performed properly.
 Set the IP address in such a way that it does not duplicate an existing IP address.
 Do not establish network settings from a multiple number of Easy IP Setup Software programs at the same time for
a single camera. Similarly, do not perform the "Auto IP setting" operation of the remote camera controller
AW-RP150 or AW-RP60 at the same time.
 The IP address settings may no longer be recognized as a result.
 To enhance the security of the Easy IP Setup Software, it will not be possible to make network settings for the target
camera once about 20 minutes or more have elapsed after turning the power of the camera on. (When the [Easy IP
Setup accommodate period] setting is [20min] )
 The Easy IP Setup Software cannot be used from a different subnet via a router.
1. Start the Easy IP Setup Software.
2. Click the [Search] button.
29