Important Notice; Feature And Benefits; New Chiller Picture - Hitachi RCUE40AG1 Installation, Operation And Maintenance Instructions

Air cooled water chillers screw type
Table of Contents

Advertisement

1. IMPORTANT NOTICE

! HITACHI pursues a policy of continuing improvement
in design and performance of Products. The right is
therefore reserved to vary specifications without notice.
! HITACHI cannot anticipate every possible
circumstance that might involve a potential hazard.
! No part of this manual may be reproduced without
written permission.
! Signal words (DANGER, WARNING and CAUTION)
are used to identify levels of hazard seriousness.
Definitions for identifying hazard levels are provided
below with their respective signal words.
!
DANGER:
Immediate hazards which WILL result in severe
personal injury or death.
"
WARNING:
Hazards or unsafe practices which COULD result in
severe personal injury or death.
#
CAUTION:
Hazards or unsafe practices which COULD result in
minor personal injury or product or property damage.
NOTE:
Useful information for operation and/or maintenance.
2. FEATURES AND BENEFITS

2.1. NEW CHILLER PICTURE

HITACHI is a world leader in technology and with continual
research and product development, now offer a screw type
Air Cooled Chillers. A wide range of capacity are
available from 108 KW to 1002KW.
IMPORTANT NOTICE
! If you have any questions, contact your contractor or
dealer of HITACHI.
! This instruction gives a common description and
information for this air-cooled water Chiller which you
operate as well as for other models.
! This air-cooled water Chiller has been designed for the
following temperatures. Operate the air-cooled water
Chiller within this range.
Working Range
Maximum
Condenser Air
Inlet Temperature
Chilled Water
Outlet Temperature
! This instructions should be considered as a permanent
part of the air-cooled water Chiller equipment and
should remain with the air-cooled water Chiller
equipment.
Twin screw compressor is compatible with R407C and
R22, utilising the same oil and continuous capacity control
is giving the best efficiency to this system.
1
/1
°C
Minimum
43
5 (option: -15)
15
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents