Stopping The Engine; Mx175/Mx200 - Yamaha MX175 Owner's Manual

1
2
5. Turn the engine switch to "
Take your hand off the switch immediately after the
1
engine starts.
1. "
NOTICE
If the engine fails to start, release the switch, wait a
few seconds, then try again. Each attempt should
be as short as possible to preserve the battery. Do
not crank the engine more than 5 seconds on any
one attempt.
6. After the engine starts, warm up the engine
enough so that the engine does not stop when the
choke lever is returned to the original position.
1. Original position
701-033
7.
Set the throttle lever in desired position.
1. "
2. "
1

Stopping the engine

MX175/MX200

1.
Move the throttle lever fully in the arrow direction.
1. Throttle lever
1
" (START)
": Decrease engine speed
": Increase engine speed
Operation
" (START).
23