Operation
2
1
20
4.
Turn the engine switch to " " (ON).
1. " " (ON)
1
5.
Pull the recoil starter slowly until it is engaged,
then pull it briskly.
Be careful to use the recoil starter. In rare cases,
the recoil starter handle can be drawn back quickly
by the engine kickback.
6.
After the engine starts, warm up the engine
enough so that the engine does not stop when the
choke lever is returned to the original position.
1. Original position
1
7.
Set the throttle lever in desired position.
1. "
2. "
1
MX250/MX300/MX360 (Manual starting)
1.
Turn the fuel cock lever to ON.
1. ON
WARNING
": Decrease engine speed
": Increase engine speed