Table of Contents
Advertisement
Unpacking
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Needed for Setup
The following are needed to complete the setup
process, but are not included with your machine.
Description
•
Disposable Rags ........................ As Needed
•
Cleaner/Degreaser ..................... As Needed
•
Safety Glasses (for each person) ............... 1
•
Disposable Gloves ..................... As Needed
•
Additional People ....................................... 3
•
Wrench or Socket 13mm ............................ 1
•
Hex Wrench 6mm ....................................... 1
•
Lifting Straps (rated for 500 lbs.) ................ 2
•
Forklift or Crane ......................................... 1
•
Flat Head Screwdriver
•
Mounting Hardware .................... As Needed
Model T32718 (Mfd. Since 07/21)
SECTION 2: SETUP
Qty
⁄
" ........................... 1
1
4
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 3)
A. Slip Roll (Not Shown) ................................. 1
B. Legs ............................................................ 2
C. Shoulder Screw M10-1.5 x 14 ..................... 1
D. Hollow Handle ............................................ 1
E. Cap Screws M8-1.25 x 25 .......................... 8
F.
Flat Washers 8mm ................................... 16
G. Lock Washers ............................................. 8
H. Hex Nuts M8-1.25 ....................................... 8
B
Figure 3. Loose inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Qty
C
D
E
F
G
H
-9-
Advertisement
Table of Contents
