Advertisement
WI-FI CONNECTIVITY USING
BREVILLE HOME CONNECT™ APP
This Breville Home connected product can be
controlled both through Wi-Fi and Bluetooth.
While Wi-Fi allows for connectivity and control
remotely, Bluetooth allows for control within
range of the product, even without Wi-Fi.
The Breville BodyZone™ Plus Connect Heated
Blankets can offer remote operation by using a
home Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone. The Wi-Fi function to connect
through the Breville Home Connect™ App, is
available on the following models ONLY.
LZB519WHT
SINGLE/KING SINGLE
LZB529WHT
DOUBLE
LZB539WHT
QUEEN
LZB559WHT
KING
NOTE
To control the blanket using the Breville Home
Connect™ app, the physical controller must be
plugged in to an active power outlet and set
to the AUTO setting. If the controller is turned
OFF or disconnected from the power, then the
app cannot connect to it via the network.
To go straight to the appropriate app store,
scan the QR code below.
For instructions on how to use the app, scan the
QR code below, refer to the Quick Start Guide
that can be found in the box or go to
tinyurl.com/HomeConnectQuickStart.
NOTE
The Breville Home Connect™ app is
compatible with mobile phones running
Android
5.0 or later and iOS devices 9.0
®
or later.
NOTE
To operate a controller using the app, the
controller must be plugged into an active
power outlet.
NOTE
The device does not support 5GHz Wi-Fi.
Please ensure to connect to a 2.4Ghz Wi-Fi
connection.
SET UP YOUR VIRTUAL
CONTROLLERS
Individual controllers need to be added
separately. Ensure you rename the controllers
once they are set up on the app to identify the
side of the bed if required.
Choose from the options available to allow for
easy pairing and use.
Bluetooth connection has also been activated
for this heated blanket, which will aid in the
pairing process, providing a higher success
rate when pairing.
1. Ensure the mobile device is connected to a
home Wi-Fi network.
15
Advertisement
