Advertisement
TO DETACH THE CONTROLLER/S
Ensure the heated blanket controller is in
the 'OFF' position and disconnect from the
power outlet.
Push the locking clips on the controller plug
together to release and withdraw the plug from
the controller socket.
STORING YOUR CONTROL UNIT
Remove the controller(s) when laundering
your blanket. Store your controller(s) during
summer months while your blanket remains on
the bed as a comfortable under blanket.
DUAL CONTROL UNITS
Your Double/Queen/King size heated blankets
features two controllers for individual left and
right side heating comfort.
OPERATING YOUR HEATED BLANKET
Your BodyZone™ by Breville heated blanket
has dual zone heating technology that allows
you to choose from 6 heat settings for your
upper and lower body and an auto-off timer
which allows you to pre-program the blanket
to turn off after a set number of hours (up to
9 hours).
Ensure the heated blanket controller(s) is
switched to the 'OFF' position. Connect the
controller to the blanket. Plug the cord into a
230V or 240V power outlet and switch the
power on. Slide the control switch to either the
'MANUAL' or 'AUTO' function.
NOTE
The controller(s) must be set to AUTO if using
the Wi-Fi function.
12
The LCD screen illuminates when initially
switched on and when programming the heat
and timer settings for easier visibility, but will
dim after 10 seconds of inactivity.
NOTE
On initial use, it is recommended that the
blanket be set on the highest setting (6,6) for
3 hours before sleeping on the bed. This will
assist in drying out any moisture which may
have accumulated in the mattress.
USING THE MANUAL SETTING
Slide the control switch down from 'OFF' to
'MANUAL'. The LCD screen will illuminate
showing the default settings (1,1) and auto shut
off timer of 4 hours.
SELECTING A HEAT SETTING
The BodyZone™ heated blankets have a
heat setting range of 0 to 6 for each zone.
This is displayed on the left hand side of the
LCD display.
Advertisement
