Using The Playback Timer - JVC EX-A10 Instructions Manual

Timer (continued)

Using the playback timer

Set the clock beforehand. (A page 15)
1
Slide the remote control
mode selector to
RECEIVER.
2
Press CLOCK/TIMER.
Display on the receiver
• If you accidentally pressed CLOCK/TIMER
twice or more, press CLOCK/TIMER
repeatedly until the display shown above is
displayed.
3
Press SET.
4
Set the starting time and ending
time with 2, 3 (cursor), and
then press SET.
Example:
Display on the receiver when setting the
starting time to 8:45 (for U.S.A. or Canada
models)
Display on the receiver when setting the
ending time to 9:45 (for U.S.A. or Canada
models)
• Press 2 or 3 (cursor) to select the value
and press SET to set the value.
• You can use the number buttons instead of
2 or 3 (cursor). Refer to "Using the
number buttons" (A page 15).
• For U.S.A. or Canada models, the time
display on the receiver is a 12-hour clock.
• For models sold at post exchanges, the
time display on the receiver is a 24-hour
clock.
43
5
Press 2 or 3 (cursor) to select
"ONCE" or "WEEKLY", and
then press SET.
ONCE The playback timer works once.
WEEKLY The playback timer works
weekly or every day.
6
Press 2 or 3 (cursor) to select
the desired day of the week, and
then press SET.
• Each time you press 2 or 3 (cursor), the
display changes as follows.
When "ONCE" is selected
When "WEEKLY" is selected
(The playback timer works every day.)
(The playback timer
works Monday to
Saturday.)
7
Press 2 or 3 (cursor) to select
the desired sound source, and
then press SET.
• If you have selected "FM" or "AM" in this
step, press 2, 3 (cursor) or the number
buttons to select the preset number of the
radio station whose broadcast you want to
listen to (Refer to "Using the number
buttons" (A page 15)), and then press SET.
8
Press 2 or 3 (cursor) to adjust
the playback volume, and then
press SET.
• You can use the number buttons to specify
the volume.
• The settings will appear in the display
window on the receiver.
(The playback timer
works Monday to
Friday.)