Listening To Radio; Listening To Radio Broadcasts; Setting The Am Tuner Spacing (Only For Models Sold At Post Exchanges); Selecting A Radio Station - JVC EX-A10 Instructions Manual

Listening to radio broadcasts

FM/AM
FM MODE
Setting the AM tuner
spacing (only for models
sold at post exchanges)
Some countries space AM stations 9 kHz apart,
and other countries use 10 kHz spacing.
If you purchased the system at a post exchange,
select either spacing according to the country
where you will use the system. This function is not
designed for U.S.A. and Canada models.
On the receiver ONLY:
SEARCH –
Receiver
7 When the receiver is turned off
To select 10 kHz spacing, while holding down
SEARCH + on the receiver, press F on the
receiver to turn on the power. "AM 10 kHz
STEP" appears in the display window.
To select 9 kHz spacing, while holding down
SEARCH – on the receiver, press F on the
receiver to turn on the power. "AM 9 kHz
STEP" appears in the display window.
NOTE
• If the spacing is switched, the preset radio station
memory will be erased.

Selecting a radio station

Remote control
mode selector
This receiver can receive FM and AM radio
broadcasts.
1
2
TUNING
/ /
PRESET
/ /
ENTER
Number
buttons
MEMORY
3
SEARCH +
NOTE
• Pressing SEARCH – or SEARCH + on the receiver
also enables you to select the radio station.
• If an FM stereo broadcast is difficult to hear because
of noise, you may be able to hear the broadcast
more easily by pressing FM MODE to switch the
sound to monaural reception. In this case, "MONO"
lights up. To return the sound to stereo reception,
press FM MODE again.
Slide the remote control
mode selector to
RECEIVER.
Press FM/AM to select "FM" or
"AM".
• Pressing FM/AM selects a radio broadcast
as the sound source.
• You can also use SOURCE SELECT on the
receiver to select a radio broadcast as the
sound source.
• Each time you press FM/AM, the band will
toggle between "FM" and "AM".
Example:
Display on the receiver for U.S.A. or Canada
models
Press TUNING or TUNING
repeatedly to select a radio
station (frequency).
• When the receiver has received an FM
stereo broadcast, "ST" (stereo) indicator
lights up.
• You can also select a radio station using the
automatic tuning.
Automatic tuning:
Hold down TUNING or TUNING
frequency starts changing, and then release
the button.
When the receiver has received a broadcast,
the frequency automatically stops changing.
To quit the function while searching for a
broadcast, press TUNING

Listening to radio

Frequency
until the
or TUNING .
18