Optional Accessories; Protecting The Environment - Black & Decker BEPW1300 Instruction Manual

C
Lubrication
Your power tool requires no additional lubrication.
D
Cleaning

WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle cleaner.
1. Turn OFF and unplug the pressure washer unit
2. Turn OFF the water supply.
3. Pull trigger on spray handle
7
water pressure.
4. Remove the nozzle from the spray wand
the button .
3
5. Using the nozzle cleaning tool
the nozzle.
6. Run water from a faucet or garden hose through the nozzle.
Filter Cleaning (Fig. A, L)
Inspect the filter 10 before each use and clean if necessary.
Remove the filter element and run under clear water to remove
any debris.
Storage (Fig. H, I)
• Store in a dry, covered location above freezing temperature.
sTORE inDOORs.
• Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
• Nozzles can be stored in the unit as shown in Fig. H. nOTE:
The turbo (BEPW2000) or spray fan to pencil jet nozzles can
be stored on the wand.
• Power cord can be stored coiled up and secured with the
cord retaining hook 21
• High pressure hose 1
on the handle 18 with the help of the hook and latch
strap as shown in Fig. I.
27
• The spray handle can be stored onto the rear of the unit
4
using the bracket 26 as shown in Fig. I.
• The spray wand 2 can be stored onto the rear of the unit
using the bracket 26 as shown in Fig. I.
16
to relieve any
4
2 by depressing
14 , unclog any debris from
as shown in Fig. I.
can be stored coiled up and secured

Optional Accessories


WARNING: Since accessories, other than those offered by
BLACK+DECKER, have not been tested with this product,
use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only BLACK+DECKER
recommended accessories should be used with
this product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. Products marked with this symbol
w
must not be disposed of with normal household waste.
Products contain materials that can be recovered or
recycled reducing the demand for raw materials. Please
recycle electrical products according to local provisions. Further
information is available at www.2helpU.com.
.
English
11