Table of Contents
Advertisement
Gearbox
The gear drive machines have a 5-speed gearbox.
The gear selector is placed under the control panel.
Only shift gear when the machine is standing still and
on level ground.
Running
1.
Depress one operator presence lever and shift
transmission to the desired gear.
2.
Unlock the motion control levers by pushing the
neutral bail down, out of the neutral slots. Slowly
release both levers at the same time to begin
forward motion.
The steering system of this mower uses individual
right and left motion control levers on the handle
bars. Squeezing the lever will reduce tension on
the wheel drive belt, eliminating power to that
wheel. With the opposite wheel still under power, a
turn is accomplished.
If the motion control lever is squeezed even
tighter the brake will be applied to that wheel and
a tighter more abrupt turn is accomplished. Turn
left by squeezing the left hand lever or turn right
by squeezing the right hand lever. If you squeeze
both levers the mower will stop.
OPERATION
Gear shift lever
4
1. Operator Presence lever
2. Drive lever
3. Neutral Bail
4. Handle
Handle with bail in neutral position
1
8011-482
2
3
8011-482
Husqvarna-25
Advertisement
Table of Contents
