Advertisement
SX-XD33
Removing the satellite speaker
Prior to performing the following procedures, remove
the cabinet.
1.
Remove the screw marked A attaching the net to the
cabinet.
2.
By using tweezers and like which is inserted through
the hole of
the net, remove the couple-face
adhesive tape holding the net to the cabinet.
3.
Remove the eight screws marked B attaching the
speaker to the cabinet.
4.
Pull out the speaker from the cabinet toward you.
5.
Remove the speaker harness from the speaker
terminal.
Note:
When it is hard to remove the net, insert a
tweezers, etc. Exercise care not to damage the
cabinet and the speaker when inserting the
tweezers and the like. For this purpose, insert
cloth together with tweezers and the like.
Remove the holder of the net carefully because
the net is pinned on the cabinet with glue.
Please apply a small amount of glue to the
boss of the net on the occasion of attachment.
1-4
(See Fig.4~6)
B
B
Net
Cabinet
Fig.4
Speaker
B
Speaker
B
Fig.5
Horder
Both sides tape
Speaker
terminal
Speaker
harness
Fig.6
Advertisement
