Step 11. Operating Your Thermostat - Honeywell CT8602 Owner's Manual

Press until the display shows the day you want to copy to.
Day
Press to accept the change.
Copy
Repeat these steps for each day you want to copy.
NOTE: donE appears for two seconds and then the normal program display appears.
Clear a Program Period
NOTE: Wake cannot be cleared.
Press ,
Leave
Return
Press until the desired day displays.
Day
Press and hold the
Repeat the above steps for each period to be cleared.
Run
Press .
Program

STEP 11. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)
Press or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis-
played. Temporary appears in the display. The setting cancels when the next program period starts or when
you press
Program
, or for the program period you want to clear.
Sleep
, , or
Leave Return Sleep
Run .
for approximately 3 seconds until the time and temperature clear.
17
Mon Wed
M13328
M13329
69-1532