Table of Contents
Advertisement
On-Screen Information During Playback
Various types of information on recording will be superimposed on playback picture
you are viewing in the viewfinder or on the LCD screen.
Recording mode
: Movie
: Still
Adjusting
*Adjusting
LCD
volume
brightness
Division of scene
*Adjust the playback sound volume by turning the Select dial. The VOL control buttons on remote control
can also be used.
Switching On-screen Information Display On or Off
You can switch the mode for displaying on-screen information during playback:
•
Display OFF:
Only division of scene, selection of range,
scene, and
•
Partial display: Only division of scene, selection of range and playback status will
appear. The playback indicator
seconds.
•
Display ON:
All information will appear.
1. Press the DISPLAY button.
Pressing the button will switch the options as fol-
lows:
The setting of on-screen information display will
be held in memory even after the DVD camcorder
is turned off.
Display OFF
Playback status:
Memo of scene being played back
Selection of range
last image of last scene will appear.
Partial display
Display ON
Playback
Skipping to following scene
Play pause
Skipping to preceding scene
Fast forward
Frame advance
Fast back
Frame back
Forward slow
First image of first scene
Reverse slow
Last image of last scene
will light for approximately 3
DISPLAY
Playing Back
Repeat play
Slide play
Battery remaining level
(Only the remaining level
warning will appear.)
Time when
recording started
Date when
recording started
first image of first
97
Advertisement
Table of Contents
