Table of Contents
Advertisement
6. Start recording.
Press the REC button: Recording will start.
Pressing REC again will terminate recording and
set the DVD camcorder to the recording pause
mode.
Playing It Back
1. Press the
the recording pause mode.
The DVD camcorder will enter the play-
back mode, and the first image of the
movie you have recorded will play back.
Tip:
• Disc Navigation (see p. 98) is useful when
you play back recorded images in full scale
or wish to edit them.
2. Stop playback.
Pressing the
the recording pause mode.
3. Turn power off.
While holding button at the center of POWER
switch, press the switch down: The red indicator
of the button will go out. Wait a few seconds until
the indicator turns off.
Do not remove the battery pack or AC adapter/
charger from the DVD camcorder until the indica-
tor at the center of POWER switch and ACCESS
indicator are completely off.
button while in
button will terminate playback and set the DVD camcorder to
Trial Record and Play Back
REC
1
2
POWER
15
Advertisement
Table of Contents
