Viewing The Picture Played Back On Your Tv - Hitachi VM-1800A Instruction Manual

VIEWING THE PICTURE PLAYED BACK ON YOUR TV

VIEWING THE PICTURE PLAYED BACK ON YOUR TV
To play back a tape recorded on your camcorder and view it on your TV receiver, you
must connect the camcorder to the TV receiver using either audio/video cable (supplied
only with VM-3800A) or RF converter unit (optional).
You also may play back the tape recorded by your camcorder on any other VHS video
cassette recorder. The camcorder records and plays back in VHS standard speed (SP).
A tape recorded in long play (LP) or extra long play (EP) cannot be played back on this
camcorder.
Example 1: If your TV has "VIDEO IN" and "AUDIO IN " jacks,
1. Connect the audio/video cable to "AUDIO IN" and "VIDEO IN" of your TV.
2. Connect the other end of the audio/video cable to "AUDIO" and "VIDEO" of your
camcorder.
3. Turn on your TV.
4. Set "AV OUT/IN" switch to "OUT" position.
5. Press "STOP/EJECT" button on the camcorder and then insert the cassette.
6. Place "POWER" switch in "VIDEO" position.
7. Press "PLAY" button.
8. After playing press "STOP/EJECT" button.
Tracking adjustment
When playing prerecorded tapes or tapes recorded by the recorders other than your
48