Audio And Video Dubbing - Hitachi VM-1800A Instruction Manual

AUDIO AND VIDEO DUBBING

AUDIO AND VIDEO DUBBING
9
The audio and video dubbing feature lets you record new audio (sound) and video (pictures)
simultaneously on a previously recorded tape.
When you audio and video dub a tape, the previous audio and video are erased and replaced with the
new sound and pictures. The replacement audio and video can be the sound and picture taken by the
camera or from a video source connected to "AUDIO" and "VIDEO" jacks on the camcorder.
NOTE: When dubbing the sound and picture from a video source, set "AV OUT/IN" switch
to "IN" position. When dubbing the sound and picture from the camera, set "AV OUT/IN"
switch to "OUT" and do not connect "AUDIO" and "VIDEO" jacks.
1. Insert a recorded tape. Be sure that the record safety tab is not missing.
2. Place "POWER" switch in "VIDEO" position.
3. Press "PLAY" button and then "REW" or "F.FWD" button to search to the
approximate position of the tape on which you want to dub sound and picture.
4. Press "PLAY" button again to search the exact position where you wish to stop
dubbing and then press "REC/PAUSE" button at the exact position.
46