Communication Setup - Motorola WT41N0 Integrator Manual

Communication Setup

The wearable terminal can communicate with a host computer using the Single Slot USB cradle. By default the
wearable terminal is configured to communicate using USB. Ensure that ActiveSync on the host computer is
set to allow USB connections.
Ensure that ActiveSync was installed on the host computer and a partnership was created.
1.
Start ActiveSync if it is not running on the host computer. To start, select Start > Programs > Microsoft
2.
ActiveSync.
ActiveSync - Not Connected
Figure 2-3
In the ActiveSync window, select File > Connection Settings. The Connection Settings window
3.
displays.
Connection Settings
Figure 2-4
Select Allow USB connection check box.
4.
Select OK to save any changes made.
5.
NOTE Every wearable terminal should have a unique device name. Never try to synchronize more than one
wearable terminal to the same name. The device name is set in the System Properties window.
Connect the device to the host computer.
6.
NOTE The cradle requires a dedicated port. It cannot share a port with an internal modem or other device. Refer
to the computer user manual supplied to locate the serial port(s).
Accessories 2 - 5