Adjusting The Height Of The Upper Basket - Beko BDFN Series Manual

Adjusting the height of the upper
basket
(depending on the model)
The upper rack height adjustment
mechanism is designed so that you
can create large spaces in the upper
or lower machine compartment by
adjusting the rack up or down,
depending on whether it is empty or
low. mechanism, you can use your
basket in three different positions
including lower, middle or upper.
To lower the basket, proceed as
follows when the basket is in its
highest position;
1. Hold the upper basket wires and lift
the mechanism handle upwards as
shown in figure (A).
2. Lower the basket to the next
lower position.
3. Release the basket when it
hooks to the next lower
position.
Repeat the same operation if the height
is not sufficient.
1. To raise the basket, hold the basket
wires and pull the basket up with
both hands when it is in its lowest
position (B)
2. Release the basket when it
hooks to the next position
28/EN
top by making a "click" that can be
heard from the right and left
mechanisms.
Repeat the same operation if the height
is not sufficient.
The movement mechanism may
not work properly when the upper
basket is overloaded or when the
load is unbalanced.
And it can go to the next lower
position in heavier conditions.
Make sure the adjusters on the
right and left of the upper rack are
aligned.
1
2
3
1
2
3