Function Check; Cpu Reset - Electrolux TE1220E Installation Manual

Installation manual
38

10 Function check

May only be carried out by qualified personnel.
A function check must be made when the installation is finished and before the machine can be ready to be used.
Whenever a repair has been made, a function check must be performed before the machine can be used again.
Check the automatic stop of the machine
• Start the machine.
• Check if the micro switches are working properly: The machine must stop if the door is opened.
Check the heat
• Let the machine work for five minutes on a program with heat.
• Check that the heating is working by opening the door and feel if there is heat in the drum.
Ready to use
If all tests are OK the machine is now ready to be used.
If some of the tests failed, or deficiencies or errors are detected, please contact your local service organisation or
dealer.
The installer shall instruct the user on the operation of the appliance before leaving.

11 CPU reset

A CPU reset will return the machine's registers and temperature settings to default values. The machine will be set to
COIN mode and pricing cleared.
To finish CPU reset, you need to follow the below two steps:
1. Unlock and separate the PCB assembly from the control panel seat.
2. Press and hold the reset button for 6 seconds on the back of the PCB assembly until hear "Bi-Bi" sound and show
0.00 on the screen, then release the finger to finish reset setting.