Function Check - Electrolux T4900 Installation Manual

Function check

To be carried out by qualified personnel
Check whether the drum is empty and the door
has been closed.
Checking the magnet switches
Start the dryer.
Check if the magnet switches are working
properly:
• The dryer must stop if the loading door is
opened.
• The dryer must stop when the filter door is
opened.
Correct direction of rotation
Correct direction of rotation on blower wheel:
1
The blower wheel must rotate clockwise.
If the direction of rotation is not correct, swop two
phases on the connection terminal.
Final test
Heat: Let the dryer work for 5 minutes on a
program that requires heat.
Then check whether the heating is working by
opening the door and feeling the heat.
Only dryers with tilting function: It is important
to test the tilt function at the end.
Only dryers with Sliding Door: Sliding Door
2
must be capable of being opened with a force of
max 10 kg / 98N.
If the above tests-points are in order, the dryer is
ready for use.
Please instruct user in correct operating
procedure before leaving.
Please hand all instructions to user.
Service organisation / dealer
If deficiencies or errors are detected, please
contact your local service organisation / dealer.
Function check
487 19 24 05.01
1
2
39
W00050
W00153