GE GE1101P User Manual page 57

Troubleshooting
DVD Problem
Subtitle and/or audio
l language is not the one
selected from the initial
setting
No on-screen display
Play doesn't begin when
a title is selected
No forward or reverse scan
Disc won't play
Desired angle cannot be changed
Picture is not displayed
with correct aspect ratio
Forgot Rating Limit Password
Cannot copy discs to video tape
"will not read disc" or
other error message
chapter 6 _________________________________________________________________ 55
Solution
If the subtitle and/or audio language does not exist on the disc, the
initial settings will not be seen/heard. The disc's priority language is selected
instead. Set the subtitle and or audio language initial setting manually.
The OFF setting is selected for OSD Display; select ON in the Setup menu.
The rating level has been set and the disc is subject to that restriction.
Some DVDs have sections that prohibit rapid scanning, or title and chapter skip.
• Both the player and the DVD is coded by region. If the regional codes don't
match, the disc cannot be played. This player is Region No. 1. Check the disc
code.
• Verify that the disc is a type that this player can read. See page 22.
• Clean the disc.
• Try another disc to see if the disc that won't play is bad.
Some DVDs do not have the multi-camera angle system, and some discs have it
only on certain portions.
Make sure the TV SCREEN feature in the Setup menu is set correctly for
your television.
With the power on, press and hold the STOP and PLAY/PAUSE buttons on the
player. This resets the password feature and all other settings to the initial factory
settings. You may be required to select a menu language the next time you power
up.
This player is equipped with anticopy protection.
Turn the player off and unplug it to reset the DVD player. Wait approximately 2
minutes, plug the player back in and turn it on.
Reference