Dvd Player + Tv With Audio/Video Input Jacks - GE GE1101P User Manual

Connections and Setup
8 _______________________________________________________________ chapter 1
TV
S-VIDEO
1
DVD
2
PLAYER

DVD Player + TV with Audio/Video Input Jacks

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the
back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the
back of your DVD Player, and to the Video Input jack on your TV.
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection listed above.
Note: Your cable or off-air connection to the television should not be affected by this connection.
Connect your cable or off-air antenna to your television as you normally would. You may need to
consult your television manual for details.
AUDIO OUT
R
AUDIO IN
VIDEO IN
R
2
DIGITAL AUDIO OUT
AUDIO OUT VIDEO OUT
COAXIAL
R L
1
OPTICAL
R L
2
S-VIDEO
OR
L
L
1
Go to page 19
CABLE
OR
OFF-AIR SIGNAL
ANT IN