Advertisement
CONTINUATION SHEET
the other untreated damper.
9. Repeat the same process on the other rear
damper.
10. When both sides have been treated.
Lower the vehicle and road test it to confirm
the noise has gone.
11. Clear the grease from applicator jig using
air gun to blow out the old grease and clean
the tube ready for the next vehicle.
Do not over spray the lubricant, as this
•
may cause a damper leaking affect on
outside of damper tube. If over spray
occurs, ensure all visible grease is
cleaned off damper tube to avoid miss
diagnosis of leaking dampers at a later
date.
Only use the BG HCF waterproof spray
•
grease for this repair. It should not be
used as a general workshop lubricant.
Parts Information
<Part Number>
52611-SMG-ZS00 Damper Grease
52610-SMG-ZS00 Grease Applicator
The initial free supply of the kit (grease & jig)
will now be discontinued as all countries who
previously ordered the free kits have now
been supplied.
If you require additional grease or jig's, then
use the individual part numbers as described
in the parts section.
Additional grease or jig's cannot be claimed
under warranty as they are deemed
consumable items.
If used correctly the spray grease will treat a
least 55 vehicles. The spray grease should
only be used for rear damper repairs, it
should not be used as a general workshop
lubricant.
Note: Do not use other greases or lubricants
as they will affect the repair success.
Warranty Information
Application: Normal Warranty
Causal Part: 52610-S**-*** (Refer to Web
EPC for VIN being repaired)
<Part Name>
Jig
Claim Code: 042
NEWS Symptom Code: 04201 (Abnormal
Noise)
Operation No.(LON-NEWS Only): 4170A2
Treat both rear dampers with spray grease.
FRT: 0.2
Note: BG HCF Grease must only be used to
prevent oil seal damage and is provided as a
permanent repair. This should only be applied
in cases of customer complaint.
Bulletin No
SJ-06-004-05
PAGE 4 OF 4
Advertisement
