CONTINUATION SHEET
2. Prime the jig with grease (A).
Shake the BG,HCF grease can
•
thoroughly.
Attach the tube between the aerosol
•
grease can and the applicator jig.
Spray a priming shot of grease through
•
the jig.
Ensure the grease exits top of the jig
•
freely.
3. Insert the grease applicator jig between
dust cover and damper tube from rear of
vehicle. Do not force the jig under dust cover.
Ensure that depth indication mark on jig
•
(2) is in line with the bottom of the dust
cover(1). Fig B. Relevant to the model
being treated.
Bulletin No
SJ-06-004-05
PAGE 2 OF 4