Product Setup - D-Link DUB-E100 Quick Installation Manual

PRODUCT SETUP

Step 1:
Plug the DUB-E100's USB cable into an available USB port
on your computer.
Step 2:
Run the setup file in the opened folder to begin the DUB-E100 driver installation.
Note: If the folder containing the setup file is not opened automatically, please open it
through a file manager and run the setup file.
Step 3:
Attach an Ethernet cable to the Ethernet port on the
DUB-E100 and to your network switch, hub or router.
Installation complete
When the installation of the DUB-E100 is complete, the 100M LED will be solid green when the
DUB-E100 is connected to a 100 Mbps network. The ACT LED indicates when data is being transmitted
or received by flashing green. If both LEDs are unlit, there may be a problem with the physical connection.
Check the cables between your DUB-E100, the computer, and the network. Verify that your network
switch, hub, or router is powered on.
ACT LED
Flashes green when data is
being transmitted or received.
3
100M LED
Lights up solid green when
the network connection is at
100 Mbps.
Power LED
Lights up solid green when
the network adapter is
connected to a U SB port.
DUB-E100