Honeywell 8680i Quick Start Manual page 11

Wearable scanner

Hide thumbs Also See for 8680i:

host, the scanner stores the connection to the host device

address and switches virtual COM ports. This allows the scanner

to automatically relink to the host if the connection is lost.

Scan the Non-Base BT Connection bar code below to

unlink your scanner and put it in a discoverable state.

Set your host device so it searches for other Bluetooth

devices. (Refer to your host device's User's Guide for pairing

instructions.)

Once your host device has located the scanner, select the

8680i scanner name from the list displayed.

If a PIN is requested, enter 1234 (the default).

The Bluetooth symbol appears in the scanner window when the

scanner pairs with a host. The connection to the host device

address is stored in the scanner and virtual COM ports are

switched. This allows the scanner to automatically relink to the

host if the connection is lost.

Once the scanner battery is charged and you have paired it to a

host device, you may begin scanning bar codes.

Connect the Scanner via WiFi

Note: WiFi capability is only supported by 8680i scanners that

are licensed for WiFi.

All manuals and user guides at all-guides.com

Non-Base BT Connection

Table of Contents