Replacing A 2.5-Inch Hdd/Ssd Module - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

▶ Press both tabs together (1) and push the HDD dummy module into the
empty HDD bay until it engages (2).
Concluding steps
"Reassembling" on page
7.5.6

Replacing a 2.5-inch HDD/SSD module

Customer Replaceable
Unit (CRU)
Tools:
– Installation frame included: tool-less
– Installation frame excluded: Phillips PH1 / (+) No. 1 screw driver
TX1320 M5
Hard disk drive (HDD) / solid state drive (SSD)
54.
Upgrade and Maintenance Manual
Hardware: 5 minutes
157