Table of Contents
Advertisement
Chapter 3
WEP Security
Passphrase
Enter the Passphrase or WEP key.
The passphrase is case-sensitive and must be 16 or
fewer alphanumeric characters. It must match the
passphrase of your other wireless network devices
and is compatible with Linksys wireless products only.
(For non-Linksys wireless products, enter the WEP key
manually.)
If you enter the network's WEP key, enter the
appropriate number of hexadecimal characters ("0" to
"9" and "A" to "F"). For 64-bit encryption, enter exactly
10 hexadecimal characters. For 128 -bit encryption,
enter exactly 26 hexadecimal characters.
To connect to the network, click Connect. To cancel
the connection, click Cancel.
2.
Click
Finish.
Congratulations
Congratulations! The Adapter is connected to
the network.
Dual-Band Wireless-N ExpressCard
Wi-Fi Protected Setup
If you connect to a router that supports Wi-Fi Protected
Setup, then you will view this screen:
Select a Method
Before you begin, make sure the router and the computer
with the Adapter are in the same room. Then select the
method that is most convenient for you.
Push Button (Recommended)
the push button method.
Use Adapter's PIN number
the Adapter's PIN number on the router.
Enter Key Manually
Select this option to manually enter
the security key.
Click Next to continue, or click Back to return to the
previous screen.
Proceed to the instructions for the method you selected.
Use the Push Button
1.
Press the
Wi-Fi Protected Setup button on the router.
2.
Within two minutes, click the
button
on this screen.
Use the Push Button
Configuration
Select this option to use
Select this option to enter
Wi-Fi Protected Setup
10
Advertisement
Table of Contents
