Advertisement
Quick Links
Clamp the stiffener inside the bottom flange of the firewall.
Cleco every other hole as you drill.
ZODIAC
Zenith Aircraft Company
601 XL
www.zenithair.com
Revision 2.3 (02/05/08)
© 2002 Zenith Aircraft Co
P/N: 6B6-2
Firewall
P/N: 6B6-1
Firewall Bottom Stiffener
Back drill through the
predrilled holes in the
Firewall through the
Firewall Bottom Stiffener
(flange that overlaps
firewall, do not drill bottom
flange).
A4 Rivets
FUSELAGE ASSEMBLY
6-B-6
Page 1 of 7
Advertisement
Related Manuals for Zenith ZODIAC 601 XL
Summary of Contents for Zenith ZODIAC 601 XL
- Page 1 (flange that overlaps firewall, do not drill bottom flange). A4 Rivets Cleco every other hole as you drill. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 1 of 7...
-
Page 2: Fuselage Assembly
Cleco the Firewall Top Stiffener to the Firewall. Expand the predrilled holes first with a #30 drill then to #20, Cleco every other hole as you drill. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 2 of 7... - Page 3 L angle. Back drill through the predrilled holes in the Firewall through the L angle and Cleco every other hole. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 3 of 7...
- Page 4 The stiffener is positioned with the centerline over the pilot holes for the top and bottom engine mount fitting. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 4 of 7...
- Page 5 Align the center line through the engine mount hole, drill, and Cleco both top and bottom engine mount holes. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 5 of 7...
- Page 6 Layout the contour of the firewall on the side stiffener 6B6-3. Remove and trim. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 6 of 7...
- Page 7 Draw a 10mm edge distance line down the L angle. Align the line on the L angle through the predrilled holes in the Firewall. Drill and Cleco the L angle to the Firewall. ZODIAC Zenith Aircraft Company Revision 2.3 (02/05/08) FUSELAGE ASSEMBLY 601 XL www.zenithair.com © 2002 Zenith Aircraft Co 6-B-6 Page 7 of 7...