Camera - Philips VideoTracer VTR8300 User Manual

6 Camera

When you use the device for photo taking for the first time,
please read the instructions in this section! In the camera
preview state, directly press the camera button to take a
photo. In the state of photo taking, the red indicator lights
on, and the device makes a sound of 'beep'. In the video re-
cording state, press the camera button to capture the picture
at the time. The interface of which is shown as Figure 1.
Figure 1
44 EN
Notice
• When the battery icon is showing empty, it means low
on battery. The system will shut down automatically
at low power. If users are recording, the system will
automatically save the recorded files and then shut down.
In case of a low battery, please charge the device timely.
During low battery, the device gives the "Low Battery"
notice as shown below:
Reminder
• Before recording, please adjust the recording parameters
first.
• Please delete some unnecessary files before recording.
• The device has a photosensitive element; if infrared
switching is set as automatic switching, the infrared lamp
will turn on automatically when ambient light drops to a
certain value.