Reminder Mode - Philips VTR7610 User Manual

7 Reminder Mode

1. In the main menu interface or standby interface, long press
any of the "1, 2, 3 and 4" numeric buttons on the top,
you can enter the message setting interface. For example,
if you long press the "1" numeric button, the prompt as
shown in Figure 1 will pop up. Press the "Play" button to
confirm, Figure 2 will pop up. After setting the time, press
confirmation, Figure 3 will pop up. If any message has
already been set in Message 1, then the prompt as shown
in Figure 4 will pop up. Please note that If you choose to
overwrite the message, the previous message file will be
covered.
Figure 1
Figure 3
42 EN
2. Time setting interface: In the message time setting
3. Message setting: First go to the setting menu to set the
• When month and day are set as N and a message is
• When month is set as N, but day is not set as N, the
• When month is not set as N, but day is set as N, the
• When the number is set as N, the message, once played,
Figure 2
4. When the set time is smaller or equal to the system time,
Figure 4
interface, short press the recording button to switch the
year, month, day, hour, minute and number, then slide up
and down to switch value;
system time, and then set the message time.
Attention:
left at the same time, the message will remind the user
regularly every day.
message will play at the set time of the day every month.
message will play at the set time every day of the month.
will keep repeating.
the following interface will be shown as a reminder: