Voice Recording Mode - Philips VTR7610 User Manual

5 Voice Recording Mode

Attention:
• When you use the multifunctional recorder to record
sound for the first time, please pay attention to the
instructions in this section! Test the recording first
to ensure that the multi-function recorder is set up
correctly.
Before recording, set the function and recording type.
Select the folder for file storing. When recording stops, long
press" "to select among folders of A, B, C and D to store
the audio file.
• Each folder can keep 99 audio files at the maximum. The
four folders can keep 396 files altogether. When a folder
is full, the new file will be automatically saved in the next
folder. When all folders are full, the device cannot record.
Make sure to delete some files or transfer them to the
computer before using the device to record again.
• When recording, press the "Listening button" to turn on
the listening mode and press the "Listening button" again
to turn off the listening mode.
(1) Long press the "Recording" button to start recording,
the "Recording" indicator light (red) is always on. During
recording, short press the "Play" button to pause the
recording and short press it again to cancel the pause
and continue the recording. Please align the built-in
microphone with the sound source during recording.
(2) Press the "Stop" button to end the recording and return
to the "stop playing interface" of the current recording
file.
(3) For the detailed operation of recording settings , please
refer to Paragraph (9): Recording Settings under Section
13: System Settings.
The recording interface is shown below.
1
3
2
4
5
6
Number of current file(s)
1
2 Number of existing files(s)
3 Current folder
Current file name
4
Current file recording time
5
6 Remaining recordable time
10 9
8
7
EN 39