Casio CTK-691 User Manual page 60

CTK691E01-01.book 58 ページ ２００３年９月２９日 月曜日 午後４時４７分
Song Memory Function
Specifying Chords in the Normal Mode
When the accompaniment mode is set to NORMAL during
step recording, you can specify chords using a method that is
different from CASIO CHORD and FINGERED fingerings.
This chord specification method can be used to input 18
different chord types using only two keyboard keys, so
chords can be specified even if you don't know how to
actually play them.
1
Major
2
Minor
3
Augmented
4
Diminished
5
Suspended four
6
Seventh
7
Minor seventh
8
Major seventh
9
Minor major seventh
bk
Seventh flat five
bl
Minor seventh flat five
bm
Seventh suspended four
bn
Diminished seventh
bo
Minor add ninth
bp
Add ninth
bq
Minor sixth
br
Sixth
bs
Six ninth
To specify a chord, hold down the key on the root input
keyboard that specifies the root, and press the key in the
chord type input keyboard to specify the chord type. When
inputting a chord with a specified bass note, pressing two
keys of the root input keyboard causes the lower note to be
specified as a bass note.
Example 1:
To input Gm7, hold down G on the root input keyboard
and press the m7 key on the chord type input keyboard.
E-58
Example 2:
To input Gm/C, hold down C and G on the root input
keyboard and press the m key on the chord type input
keyboard.
Specifying the Length of a Note
During step recording, the number buttons are used to
specify the length of each note.
Note lengths
Use number buttons [1] through [6] to specify whole notes ( ),
half notes ( ), quarter notes ( ), eighth notes ( ), 16th notes
( ), and 32nd notes ( ).
Example:
To specify a quarter note ( ), press [3].
Dots ( ) and triplicates (
While holding down the [7] (dot) or [9] (triplicate), use
buttons [1] through [6] to input the lengths of the notes.
Example:
To input a dotted eighth notes ( ), hold down [7] and
press [4].
Ties
Input the first and then the second note.
Example:
To input , press [4] and then [8]. Next, press [5]. This
note will be tied to the next note you input (16th note in
this example).
Rest
Hold down [0] and then use number buttons [1] through [9]
to specify the length of the rest.
Example:
To input an eighth note rest, hold down [0] and press [4].
Pressing the [ ] CURSOR button inputs rests up to the
beginning of the next measure
)
705A-E-060A