Using The Wireless Controller - Canon Power Shot SD30 Basic User's Manual

Using the Wireless Controller

Installing the Battery
Insert the lithium coin battery (CR2025) into the wireless controller before
use.
1.
Slip a fingernail into (
press in the direction of the
arrow while slipping another
fingernail into (
removing the battery holder.
2.
Place the battery in the holder
with the "+" side up (
replace the holder.
Operating the Wireless Controller
Other than the operations listed above, all of the buttons perform the same
functions as the corresponding buttons on the camera.
However, functions requiring the user to press two buttons at the same
time can only be performed with the camera.
For battery removal instructions and handling precautions, see the
Advanced Guide (p. 16).
24
Store the lithium coin battery out of the reach of children.
) and
Remote Control
Sensor
Transmitter
) and
) and
Pressing this button toggles
between transferring to a
computer and playing back
on the LCD monitor.
The information display
mode advances (Standard—
Detailed—Off) each time you
press this button.