Using The Wireless Controller (Sold Separately) - Canon PowerShot S1 IS User Manual

Using the Wireless Controller (Sold Separately)

Installing the Battery
Install the date battery (CR2025) into the Wireless
Controller WL-DC100 (sold separately) before use.
Warning
Be particularly careful to keep the date batteries out of the
reach of children. Seek medical assistance immediately if
a child swallows a battery since corrosive battery fluids
could damage the stomach or intestinal wall.
1
Place your fingertip
on a a a a and press it in
the direction of the
arrow while placing
another fingertip on
b b b b and removing the
battery holder.
2
Place the date bat-
tery in the battery
holder with the neg-
ative terminal (-) fac-
ing up. Then replace
the battery holder
into the wireless controller.
Negative
terminal
(-)
Removing the Battery
To remove the date battery, pull
it in the direction of the arrow.
If you ever dispose of your camera, first
remove the date battery for recycling
according to the recycling system of your
country.
Shooting/Playback
The wireless controller can be used to shoot or play
back. The wireless controller can be operated from
an approximate distance of up to 5 m (16.4 ft.) from
the front remote sensor.
Remote Sensor
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen
maar inleveren als KCA
Transmitter
Appendix 135