Download Print this page
Kenwood CAW-CANOP1 Manual

Kenwood CAW-CANOP1 Manual

Advertisement

Quick Links

CAW-CANOP1
CANBUS STEERING WHEEL
COMMANDS ADAPTER FOR
OPEL CORSA D
rev 1.0.09
ATTENTION VERIFY THAT THE RADIO CANBUS LINE IS ACTIVATED
OTHERWISE MAKE IT WITH OPEL DIAGNISTIC PC SYSTEM
CAW-CANOP1 is an adapter for steering wheel commands in CANBUS; its compatibility e-
xtends to the OPEL CORSA D with a predisposition for OEM autoradios and to autoradios in
the KENWOOD range with a wired remote input.
The module supplies a positive ignition, sidelights output, odometric signal as well as reverse
gear, in the versions of the vehicle where such signals are present in CANBUS.
INSTALLATION:
The installation must be carried out by experienced personnel.
CONNECT TO THE
GREEN WIRE OF
THE OEM CAR
DISPLAY
TO THE FAKRA
OF THE CAR
TO THE ISO
TO THE PLUG RADIO
RADIO
REMOTE
ANTENNA
ADAPTER
ONCE THE CONNECTIONS ARE MADE LED OF THE UNIT SWITCH ON GREEN
TO CONFIRM THE RIGHT WORKING

Advertisement

loading

Summary of Contents for Kenwood CAW-CANOP1

  • Page 1 ATTENTION VERIFY THAT THE RADIO CANBUS LINE IS ACTIVATED OTHERWISE MAKE IT WITH OPEL DIAGNISTIC PC SYSTEM CAW-CANOP1 is an adapter for steering wheel commands in CANBUS; its compatibility e- xtends to the OPEL CORSA D with a predisposition for OEM autoradios and to autoradios in the KENWOOD range with a wired remote input.
  • Page 2 HOW TO CONNECT THE CANBUS WIRE TO THE DISPLAY To connect the canbus wire to the car it is necessary to do it directly to the display. First of all remove the plastic panel shown below. Once the panel is removed, please remove the torques that keeps the display chassis blocked. Once the torques is removed, detach the display with its plastic .
  • Page 3 DIAGRAM OF CONNECTION Once disconnected the plug from the display remove the connector inside as shown in the pictu- Now detect the GREEN wire and connect the GREEN wire of CAW-CANOP1 .
  • Page 4 BUTTONS ON THE KENWOOD STEERING WHEEL RADIO Roller or INCREASE VOLUME / DECREASE VOLUME volume key Arrow up SEEK + TRACK + Arrow down SEEK — TRACK — MUTE Arrow or dotted line SOURCE MODE FUNCTIONS CABLE INTERFACE COLOUR BACKGEAR...